Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 399)

VHDL AXI3 and AXI4 Slave BFMs
set_id()
Mentor VIP AE AXI3/4 User Guide, V10.2b 379
September 2013
set_id()
This nonblocking procedure sets the id field for a transaction that is uniquely identified by the
transaction_id field previously created by the
create_slave_transaction() procedure.
Note
You do not normally use this procedure in a slave test program.
Prototype -- * = axi| axi4
-- ** = AXI | AXI4
set_id
(
id: in integer;
transaction_id : in std_logic_vector(
**_MAX_BIT_SIZE-1 downto
0) | integer;
bfm_id : in integer;
path_id : in *_path_t; --optional
signal tr_if : inout *_vhd_if_struct_t
);
Arguments id Burst ID
transaction_id Transaction identifier. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
bfm_id BFM identifier. Refer to “Overloaded Procedure Common Arguments”
on page 203 for more details.
path_id (Optional) Parallel process path identifier:
**_PATH_0
**_PATH_1
**_PATH_2
**_PATH_3
**_PATH_4
Refer to “Overloaded Procedure Common Arguments” on page 203 for
more details.
tr_if Transaction signal interface. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
Returns None