Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 282)

Mentor VIP AE AXI3/4 User Guide, V10.2b 264
VHDL AXI3 and AXI4 Master BFMs
set_addr_user()
September 2013
set_addr_user()
This nonblocking procedure sets the user data addr_user field for a transaction that is uniquely
identified by the transaction_id field previously created by either the
create_write_transaction() or create_read_transaction() procedure.
AXI3 Example
-- Create a read transaction with start address of 0.
-- Creation returns tr_id to identify the transaction.
create_read_transaction(0, tr_id, bfm_index, axi_tr_if_0(bfm_index));
-- Set the user data to 1 for tr_id transaction.
set_addr_user(1, tr_id, bfm_index, axi_tr_if_0(bfm_index));
Prototype -- * = axi| axi4
-- ** = AXI | AXI4
set_addr_user
(
addr_user : in std_logic_vector( **_MAX_BIT_SIZE-1 downto 0) |
integer;
transaction_id : in integer;
bfm_id : in integer;
path_id : in *_path_t; --optional
signal tr_if : inout *_vhd_if_struct_t
);
Arguments addr_user User data inin address phase.
transaction_id Transaction identifier. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
bfm_id BFM identifier. Refer to “Overloaded Procedure Common Arguments”
on page 203 for more details.
path_id (Optional) Parallel process path identifier:
**_PATH_0
**_PATH_1
**_PATH_2
**_PATH_3
**_PATH_4
Refer to “Overloaded Procedure Common Arguments” on page 203 for
more details.
tr_if Transaction signal interface. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
Returns None