Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 608)

Mentor VIP AE AXI3/4 User Guide, V10.2b 588
VHDL AXI3 and AXI4 Monitor BFMs
get_write_data_burst()
September 2013
get_write_data_burst()
This blocking procedure gets a write data burst that is uniquely identified by the transaction_id
argument previously created by the
create_monitor_transaction() procedure.
It calls the get_write_data_phase() procedure for each beat of the data burst, with the length of
the burst defined by the transaction record burst_length field.
AXI3 Example
-- Create a monitor transaction. Creation returns tr_id to identify
-- the transaction.
create_monitor_transaction(tr_id, bfm_index, axi_tr_if_0(bfm_index));
....
-- Get the write data burst for the tr_id transaction.
get_write_data_burst(tr_id, bfm_index, axi_tr_if_0(bfm_index));
Prototype -- * = axi| axi4
-- ** = AXI | AXI4
procedure get_write_data_burst
(
transaction_id : in integer;
bfm_id : in integer;
path_id : in *_path_t; --optional
signal tr_if : inout *_vhd_if_struct_t
);
Arguments transaction_id Transaction identifier. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
bfm_id BFM identifier. Refer to “Overloaded Procedure Common Arguments”
on page 203 for more details.
path_id (Optional) Parallel process path identifier:
**_PATH_0
**_PATH_1
**_PATH_2
**_PATH_3
**_PATH_4
Refer to “Overloaded Procedure Common Arguments” on page 203 for
more details.
tr_if Transaction signal interface. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
Returns None