Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 297)

VHDL AXI3 and AXI4 Master BFMs
set_delay_mode()
Mentor VIP AE AXI3/4 User Guide, V10.2b 279
September 2013
set_delay_mode()
This AXI3 nonblocking procedure sets the delay_mode field for a transaction that is uniquely
identified by the transaction_id field previously created by either the
create_write_transaction() or create_read_transaction() procedure.
AXI3 Example
-- Create a write transaction with start address of 0.
-- Creation returns tr_id to identify the transaction.
create_write_transaction(0, tr_id, bfm_index, axi_tr_if_0(bfm_index));
-- Set the delay mode of the *VALID to *READY handshake for the
-- tr_id transaction.
set_delay_mode(AXI_VALID2READY, tr_id, bfm_index,
axi_tr_if_0(bfm_index));
AXI4 BFM
Note
This procedure is not supported in the AXI4 BFM API.
Prototype set_delay_mode
(
delay_mode: in integer;
transaction_id : in integer;
bfm_id : in integer;
path_id : in axi_path_t; --optional
signal tr_if : inout axi_vhd_if_struct_t
);
Arguments delay_mode Delay mode:
AXI_VALID2READY (default);
AXI_TRANS2READY;
transaction_id Transaction identifier. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
bfm_id BFM identifier. Refer to “Overloaded Procedure Common Arguments”
on page 203 for more details.
path_id (Optional) Parallel process path identifier:
AXI_PATH_0
AXI_PATH_1
AXI_PATH_2
AXI_PATH_3
AXI_PATH_4
Refer to “Overloaded Procedure Common Arguments” on page 203 for
more details.
tr_if Transaction signal interface. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
Returns None