Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 472)

Mentor VIP AE AXI3/4 User Guide, V10.2b 452
VHDL AXI3 and AXI4 Slave BFMs
get_read_addr_phase()
September 2013
get_read_addr_phase()
This blocking procedure gets a read address phase uniquely identified by the transaction_id
argument previously created by the
create_slave_transaction() procedure.
Note
For AXI3 the get_read_addr_phase() also sets the ARREADY protocol signal at the
appropriate time defined by the transaction record address_ready_delay field.
AXI3 Example
-- Create a slave transaction. Creation returns tr_id to identify
-- the transaction.
create_slave_transaction(tr_id, bfm_index, axi_tr_if_0(bfm_index));
....
-- Get the read address phase of the tr_id transaction.
get_read_addr_phase(tr_id, bfm_index, axi_tr_if_0(bfm_index));
Prototype -- * = axi| axi4
-- ** = AXI | AXI4
procedure get_read_addr_phase
(
transaction_id : in integer;
bfm_id : in integer;
path_id : in *_path_t; -- Optional
signal tr_if : inout *_vhd_if_struct_t
);
Arguments transaction_id Transaction identifier. Refer to “Overloaded Procedure
Common Arguments” on page 203 for more details.
bfm_id BFM identifier. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
path_id (Optional) Parallel process path identifier:
**_PATH_0
**_PATH_1
**_PATH_2
**_PATH_3
**_PATH_4
Refer to “Overloaded Procedure Common Arguments” on
page 203 for more details.
tr_if Transaction signal interface. Refer to “Overloaded
Procedure Common Arguments” on page 203 for more
details.
Returns None