Broadsoft broadworks blf – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 1027
41-001343-01 Rev 03, Release 3.2.2
D-3
BroadSoft BroadWorks BLF
The following are sample softkey and programmable key configurations to enable Broadsoft
BroadWorks Busy Lamp Field support on Aastra IP phones.
6737i, 6757i, and 6757i CT Configuration Parameters for Broadsoft BroadWorks BLF
softkey1 type: list
softkey1 label:
softkey1 value:
softkey1 line: 1
softkey2 type: list
softkey2 label:
softkey2 value:
softkey2 line: 1
list uri: sip:[email protected]
6753i Configuration Parameters for Broadsoft BroadWorks BLF
prgkey5 type: list
prgkey5 line: 1
prgkey6 type: list
prgkey7 line: 1
list uri: sip:[email protected]
Note:
One softkey must be defined of type “list” for EACH monitored
user. So if there are 2 users being monitored, 2 softkeys must be defined
of type list.
Note:
One prgkey must be defined of type “list” for each monitored user.
So if there are 2 users being monitored, 2 prgkeys must be defined of type
list.