AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 381
5-104
41-001343-01 Rev 03, Release 3.2.2
Use the following procedure to configure LLDP-MED using the Aastra Web UI:
5
Press CHANGE to toggle the LLDP setting to Enabled or Disabled.
This field enables or disables Link Layer Discovery Protocol for Media Endpoint Devices
(LLDP-MED) on the IP Phone.
6
Press DONE to save the change.
Aastra Web UI
1
Click on Advanced Settings->Network->Advanced Network Settings.
2
The “
LLDP” field is enabled by default. To disable LLDP, click the check mark in the box to clear
the check mark.
3
In the “LLDP Packet Interval” field, enter the time, in seconds, between the transmission of
LLDP Data Unit (LLDPDU) packets.
The value of zero (0) disables this parameter. Valid values are 0 to 2147483647. Default is 30.
4
Click
to save your changes.
Aastra IP Phone UI
Step
Action
LLDP
LLDP Packet Interval