Intercom, auto-answer, and barge in settings, Outgoing intercom settings, Section – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 914
41-001343-01 Rev 03, Release 3.2.2
A-183
Intercom, Auto-Answer, and Barge In Settings
Outgoing Intercom Settings
Parameter –
sip intercom type
Type
(in Web UI)
Aastra Web UI
Basic Settings->Preferences->
Outgoing Intercom Settings
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Determines whether the IP phone or the server is responsible for notifying
the recipient that an Intercom call is being placed.
Format
Integer
Default Value
For Aastra Web UI:
Off
For Configuration Files:
3 - Off
Range
For Aastra Web UI:
Phone-Side
Server-Side
Off
For Configuration Files:
1 - Phone-Side
2 - Server-Side
3 - Off
Example
sip intercom type: 1
Parameter –
sip intercom prefix code
Prefix Code
(in Web UI)
Aastra Web UI
Basic Settings->Preferences->
Outgoing Intercom Settings
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
The prefix to add to the phone number for server-side outgoing Intercom
calls. This parameter is required for all server-side Intercom calls.
Note: The example below shows *96 for the prefix code which is used for
Sylantro servers.
Format
String
Default Value
Not Applicable
Range
Not Applicable
Example
sip intercom prefix code: *96