AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 424)

41-001343-01 Rev 03, Release 3.2.2 5-147
For Example:
During a call with this parameter disabled (Example 1), softkeys 1 (Park) and 2 (DND) do not
appear on page 1. The user has to press the More key to access them on page 2.
During a call with the “collapsed context user softkey screen” parameter enabled (Example 2),
Park and DND appear on page 1 in position 4 and 5.
Example 1: During a call with the “collapsed context user softkey screen” parameter disabled
(default).
Example 2: During a call with the “collapsed context user softkey screen” parameter enabled.
In the configuration files, you use the following parameters to enable and disable Collapsed
Context User Softkey Screen:
Configuring Collapsed Context User Softkey Screen
Use the following procedures to configure the collapsed context user softkey screen.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Shifting of Softkey Positions for Busy States” on page A-218.
416-123-4567
Park
MyXML More
L1
DND
John 2001
James
John
Page 1 Page 2
416-123-4567
Drop
Xfer
More
L1
Conf
John 2001
Page 1 Page 2
416-123-4567
Drop
Xfer More
L1
Conf
John 2001
Park
DND
416-123-4567
MyXML
James More
L1
John
John 2001