AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 928)

41-001343-01 Rev 03, Release 3.2.2 A-197
Send DTMF for Remapping Conference or Redial Key
Parameter –
map conf key to
Map Conf Key To
(in Web UI)
Aastra Web UI Basic Settings->Preferences->Key Mapping
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the Conf key as a speeddial key if a value is entered for this
parameter. If you leave this parameter blank, the Conf key returns to its
original functionality.
Note: If you configure the Conf key for speeddialing on the 6757i CT Base
Station, the Conf key on the 6757i CT handset retains its original
functionality. The Conf key on the handset is not configured for speeddial.
Format Integer
Default Value Not Applicable
Range Not Applicable
Example map conf key to: 5551267
Parameter–
map redial as dtmf Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows the phone to send the stored number as DTMF using the phone
configured DTMF method when the “Redial” key is pressed.
Format Boolean
Default Value 0
Range 0-1
0 (Disabled)
1 (Enabled)
Example map redial as dtmf:1
Parameter–
map conf as dtmf Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows the phone to send the stored number as DTMF using the phone
configured DTMF method when the “Conf” key is pressed.
Format Boolean
Default Value 0
Range 0-1
0 (Disabled)
1 (Enabled)
Example map conf as dtmf: 1