AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 361)

5-84 41-001343-01 Rev 03, Release 3.2.2
Call Hold Reminder During Active Calls
The IP phones allow a User or Administrator to enable or disable the ability for the phone to
initiate a continuous reminder tone on the active call when another call is on hold. For example,
when this feature is enabled, and the call on Line 1 is on hold, and then the User answers a call
on Line 2 and stays on that line, a reminder tone is played in the active audio path on Line 2 to
remind the User that there is still a call on hold on Line 1.
When this feature is disabled, a ring splash is heard when the active call hangs up and there is
still a call on hold.
Your can enable or disable this feature using the “call hold reminder during active calls”
parameter in the configuration files or in the Aastra Web UI.
Configuring “Call Hold Reminder During Active Calls”
You use the following procedure to enable or disable “Call Hold Reminder During Active
Calls”.
Configuration Files
For the specific parameter you can set in the configuration files for enabling/disabling “Call Hold Reminder
During Active Calls”, see Appendix A, the section,
“Call Hold Reminder During Active Calls” on page A-154.