Aastra web ui – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 591
5-314
41-001343-01 Rev 03, Release 3.2.2
5
Enter an XML URI for an incoming call event in the “Incoming Call” field. For example:
http://10.50.10.140/incoming.php?number=$$REMOTENUMBER$$
This parameter specifies the URI for which the phone executes a GET on when an incoming call
event occurs.
Note: For an incoming call event, use the associated variables indicated in the table
on
.
6
Enter an XML URI for an outgoing call event in the “Outgoing Call” field. For example:
http://10.50.10.140/outgoing.php?number=$$REMOTENUMBER$$
This parameter specifies the URI for which the phone executes a GET on when an outgoing call
event occurs.
Note: For an outgoing call event, use the associated variables indicated in the table
on
.
7
Enter an XML URI for an offhook event in the “Offhook” field. For example:
http://10.50.10.140/offhook.php?state=$$LINESTATE$$
This parameter specifies the URI for which the phone executes a GET on when an offhook event
occurs.
Note: For an offhook event, use the associated variables indicated in the table
on
.
8
Enter an XML URI for an onhook event in the “Onhook” field. For example:
http://10.50.10.140/onhook.php?state=$$LINESTATE$$
This parameter specifies the URI for which the phone executes a GET on when an onhook event
occurs.
Note: For an onhook event, use the associated variables indicated in the table
on
.
9
To configure a Connected event, see the section,
on
.
10
To configure a Disconnected event, see the section,
11
To configure an XML SIP Notify event, see the section,
on
.
12
(Optional) You can poll a URI at specific intervals on the phones. For more information about polling
Action URIs, see
on
.
13
Click
to save your changes.
Aastra Web UI