Call park/pickup configuration precedence rule – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 496
41-001343-01 Rev 03, Release 3.2.2
5-219
Call Park/Pickup Configuration Precedence Rule
For users upgrading from Release 2.x firmware, the "softkeyN value" parameter will be used if
the "sip lineN park pickup config" parameter is not set. If the per-line park pickup config
parameter is set, the following precedence rule will apply:
1.
"sip lineN park pickup config: <park_value>;<pickup_value>;<asterisk | sylantro |
broadworks>" will override
"sip park pickup config: <park_value>; <pickup_value>; <asterisk | sylantro | broadworks>"
2.
"sip park pickup config: <park_value>;<pickup_value>;<asterisk | sylantro | broadworks>"
will override
"softkeyN value: <park_or_pickup_value>" (or topsoftkeyN, prgkeyN, or expmod1 keyN).
3.
"softkeyN value: <asterisk|sylantro|broadworks>;<park_or_pickup_value>"
will have lowest priority.
For example, the following has been configured on the phone:
softkey1 type: park
softkey1 label: parkCall
softkey1 states: connected
softkey1 value: broadworks;*68
softkey2 type: pickup
softkey2 label: pickupCall
softkey2 states: idle, outgoing
softkey2 value: broadworks;*88
sip park pickup config: 70;70;asterisk
sip line1 park pickup config: *78;*98;broadworks
If the active call is using Line1, the phone will use the BroadWorks method for park (*78) and
pickup (*98) since per-line has the highest precedence.
If the active call is using any other line except Line1, the phone will use the Asterisk method for
park (70) and pickup (70) since it has precedence over the softkey value.
Note:
The 6730i, 6731i, 6735i, 6737i, 6753i, 6755i and 9143i do not
allow for the configuration of labels and states for programmable keys.
Note:
This feature is not supported on 6735i and 6737i IP phones for
Release 3.2.2.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
page A-198, “Softkey Settings for 8 and 11-Line LCD phones”
and
“Programmable Key Settings for 9143i, 6730i, 6731i, 6735i, 6753i, and 6755i”