Configuring handset feature keys – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 430
41-001343-01 Rev 03, Release 3.2.2
5-153
Configuring Handset Feature Keys
You can program up to 15 feature keys on the 6757i CT IP phone using the configuration files or
the Aastra Web UI. Use the following procedure to program the feature keys on your 6757i CT
Base Station and all paired handsets.
Use the following procedures to configure the IP phone handset feature keys.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Handset Feature Key Settings (9480i CT and 6757i CT)”
on
Aastra Web UI
1
Click on Operation->Handset Keys.
2
Select the handset key you want to program.
3
Select the function for that handset key from the "Key Function" field.
4
Click
to save the function you selected to the handset key.
The key programming information is sent to the 6757i Base Station and to all the cordless handsets
associated with that Base Station. Any key programmed to "None" does not appear in the handset’s
list.