AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 845)

A-114 41-001343-01 Rev 03, Release 3.2.2
Parameter –
sips private key
Private Key Filename
(in Web UI)
Aastra Web UI Advanced Settings->TLS Support
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows you to specify a Private Key file to use when the phone uses the
TLS transport protocol to setup a call.
This parameter is required when configuring TLS (optional for Persistent
TLS.)
You can use this parameter in three ways:
•
To download no private key
• To download a private key from the original configuration server
• To download a private key from another specified server
To download a specific file, the string value MUST HAVE A FILENAME at
the end of the string. For example:
sips trusted certificates:ftp://admin:[email protected]:50/path/
phonesPrivatekey.pem
where “path” is the directory and “phonesPrivateKey.pem” is the filename.
If you do not specify a filename, the download fails.
See examples for each below.
Note: The key file must use the format “.pem”. To create specific private
key files to use on your IP phone, contact Aastra Technical Support.
Format <file name>.pem
Default Value Not Applicable
Range Not Applicable
Example The following example downloads no private key file:
sips private key:
The following example downloads the private key file from the original
configuration server.
sips private key: phonesPrivateKey.pem
The following example uses FTP to download the firmware file
“phonesPrivateKey.pem” (private key file) from the “path” directory on
server 1.2.3.4 using port 50:
sips private key: ftp://admin:[email protected]:50/path/
phonesPrivateKey.pem