AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 130
41-001343-01 Rev 03, Release 3.2.2
3-43
Cert Validation
Validate Certificates
https validate certificates Enables or disables the HTTPS validation of
certificates on the phone. When this parameter is
set to 1, the HTTPS client performs validation on
SSL certificates before accepting them.
Notes:
1. If you are using HTTPS as a configuration
method, and use a self signed certificate, you
must set this parameter to “0” (disabled) before
upgrading to Release 2.3 or later of the IP
Phones.
2. If you are using HTTPS and the certificates
are not valid or are not signed by Verisign,
Thawte, or GeoTrust, Comodo, or CyberTrust,
the phones fail to download configuration files.
For more information, see Chapter 4,
Server Certificate Validation”
on
.
Check Expires
Check Certificate
Expiration
https validate expires
Enables or disables the HTTPS validation of the
expiration of the certificates. When this
parameter is set to 1, the HTTPS client verifies
whether or not a certificate has expired prior to
accepting the certificate.
Note: If the “https validate expires” parameter
is set to enable, the clock on the phone must be
set for the phone to accept the certificates.
For more information, see Chapter 4,
Server Certificate Validation”
on
.
Check Hostnames Check Certificate
Hostnames
https validate hostname
Enables or disables the HTTPS validation of
hostnames on the phone.
For more information, see Chapter 4,
Server Certificate Validation”
on
.
N/A
Trusted Certificates
Filename
https user certificates
Specifies a file name for a .PEM file located on
the configuration server. This file contains the
User-provided certificates in PEM format. These
certificates are used to validate peer certificates.
Note: You must disable the “https validate
certificates” parameter in order for the phone to
accept the User-provided certificates.
For more information, see Chapter 4,
Server Certificate Validation”
on
.
Parameter In
IP Phone UI
Parameter in
Aastra Web UI
Parameters in
Configuration Files
Description