AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 96)

41-001343-01 Rev 03, Release 3.2.2 3-9
References
For information about options available to a User AND Administrator in the Aastra Web UI, see
your Model-specific User Guide.
For procedures to Restart your phone or restore factory defaults, see
“Restarting Your Phone” on
page 3-14 , and “Set Phone to Factory Defaults/Erase Local Configuration” on page 3-16 .
For more information about Advanced Settings for the IP Phone, see Chapter 4, “Configuring
Network and Session Initiation Protocol (SIP) Features.”
For procedures on configuring the Basic Settings for the IP Phone, see Chapter 5, “Configuring
Operational Features.”
Configuration File Options
An Administrator can enter specific parameters in the configuration files to configure the IP
phones. All parameters in configuration files can only be set by an administrator.
References
For a procedure on using the configuration files, see Chapter 2 , the section, “Configuration Files
(Administrator Only)” on page 2-1 .
For a description of each parameter you can enter in the configuration files, see Appendix A,
“Configuration Parameters.”