AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 633
6-6
41-001343-01 Rev 03, Release 3.2.2
These parameters are disabled by default. The parameters are configurable via the configuration
files or the Aastra Web UI.
Configuring the MAC address/Line Number in REGISTER Message
Configuration Files
For specific parameters you can set in the configuration files for enabling/disabling MAC address and line
number, see Appendix A, the section,
“Advanced Operational Parameters”
Aastra Web UI
Step Action
1
Click on Advanced Settings->Global SIP->Advanced SIP Setting.
2
Enable the "Send MAC Address in REGISTER Message" field by checking the check box.
(Disable this field by unchecking the box).
3
Enable the "Send Line Number in REGISTER Message" field by checking the check box.
(Disable this field by unchecking the box).
4
Click
to save your settings.
Note: The session prompts you to restart the IP phone to apply the configuration settings.
5
Select Operation->Reset and click
.