AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 463)

5-186 41-001343-01 Rev 03, Release 3.2.2
Configuring DCP/GCP Using the Configuration Files
(for Sylantro Servers)
Use the following procedures to configure DCP/GCP using the configuration files.
Configuring Directed Call Pickup (DCP) Using the Aastra Web UI
(for Sylantro Servers)
Use the following procedure to configure Directed Call Pickup using the Aastra Web UI. This
procedure uses the 6755i IP Phone as an example.
Configuration Files
To set DCP/GCP in the configuration files, see Appendix A, the section, “Softkey/Programmable Key/
Feature Key/Expansion Module Key Parameters” on page A-200.
Aastra Web UI
1 Click on Operation->Softkeys and XML
or
Click on Operation->Programmable Keys
or
Click on Operation->Expansion Module <N>.
Depending on your phone-model, the key configuration screen displays. The 6755i Key Screen is
shown as an example
.
2 Select a key for which to configure Directed Call Pickup.
3 In the “Type” field, select Directed Call Pickup.