AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 155)

3-68 41-001343-01 Rev 03, Release 3.2.2
N/A Time (24-hour) auto resync time Sets the time of day in a 24-hour period for the
IP phone to be automatically updated. This
parameter works with TFTP, FTP, and HTTP
servers.
Notes:
1. The resync time is based on the local time of
the IP phone.
2. The value of 00:00 is 12:00 A.M.
3. When selecting a value for this parameter in
the Aastra Web UI, the values are in
30-minute increments only.
4. When entering a value for this parameter
using the configuration files, the value can be
entered using minute values from 00 to 59
(for example, the auto resync time can be
entered as 02:56).
For more information, see Chapter 8, the
section,
“Using the Auto-Resync Feature” on
page 8-7 .
N/A Maximum Delay auto resync max delay Specifies the maximum time, in minutes, the
phone waits past the scheduled time before
starting a checksync.
For more information, see Chapter 8, the
section,
“Using the Auto-Resync Feature” on
page 8-7 .
N/A Days auto resync days Specifies the amount of days that the phone
waits between checksync operations.
Note: A value of 0 causes the phone to
checksync every time the clock reads the
proper time. A value of 1 forces the phone to
wait 24 hours prior to doing the first checksync.
For more information, see Chapter 8, the
section,
“Using the Auto-Resync Feature” on
page 8-7 .
XML Push Server List (Approved IP Addresses)
N/A
XML Push Server
List (Approved IP
Addresses) xml application post list The HTTP server that is pushing XML
applications to the IP phone.
For more information, see Chapter 5, the
section,
“XML Push Requests” on page 5-300 .
Parameter In
IP Phone UI
Parameter in
Aastra Web UI
Parameters in
Configuration Files
Description