AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 613)

5-336 41-001343-01 Rev 03, Release 3.2.2
Configurable Indication of Terminated Calls
An Administrator can configure a parameter called, “far-end disconnect timer” which allows
you to enable or disable whether or not the near-end phone displays a disconnected screen (“Call
Terminated”) when the far-end hangs up. An audible busy signal is also heard on the phone. If
enabled with a maximum time interval value, this parameter also specifies the interval of time
that the busy signal is audible.
You can enable/disable this new parameter using the configuration files only.
The following are call terminated screens that display for each type of Aastra phone.
Call Terminated
1 6753i
L1 6757i
Call Transferred
12 : 23pm
Goodbye
345
Call Terminated
3-Line Display Screens 5-Line Display Screens
6739i Display Screens
Call Terminated Screens