Enabling/disabling dhcp using the ip phone ui, Ip phone ui – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 168
![background image](/manuals/253368/168/background.png)
41-001343-01 Rev 03, Release 3.2.2
4-5
Enabling/Disabling DHCP Using the IP Phone UI
Use the following procedure to enable/disable DHCP on the phone using the IP Phone UI.
IP Phone UI
Step Action
1
Press
on the phone to enter the Options List.
2
Select Administrator Menu.
3
Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4
Select Network Settings.
5
Select option DHCP.
6
Press Change to set "Use DHCP?" to "Yes" (enable) or "No" (disable).
7
Press Done to save the changes.
For the 6739i:
1
Press the Options key on the phone to enter the Options List.
2
Press Advanced. A keyboard displays.
3
Enter the Administrator password using the keyboard. Default is “22222”.
4
Press Network.
5
Press DHCP Settings.
6
In the “Use DHCP?” field, select “Enabled” to enable DHCP.
or
Press “Disabled” to disable DHCP.
7
Press the
to return to the previous screen.
8
Press the
button or the
button at any time to return to the idle screen.