AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 425)

5-148 41-001343-01 Rev 03, Release 3.2.2
Increased Number of Displayed Characters for Softkey Line Labels
Administrators can now choose to display 10 characters on softkeys and top softkeys for line
labels on 6755i, 6757i, and 6757i CT model phones. This is useful if the user wants to display a
full 10 digit number as the softkey label, instead of a shortened label containing only 7 digits
followed by ellipsis characters.
When a softkey or top softkey is defined as a line, the circle in front of the softkey label (line
icon) can be removed using the new “line icon disabled” parameter. When the “line icon
disabled ” parameter is set to “1”, the line icon will not appear and the label can be displayed
with up to 10 characters (label will not be shortened and no ellipsis characters will appear).
Configuring the Increase of Displayed Characters for Softkey Line Labels
Use the following parameter to disable the line icon and increase the number of characters
displayed for softkey line labels
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Increase of Displayed Characters for Softkey Line Labels (6755i, 6757i, & 6757i CT)” on page A-219.