AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 422)

41-001343-01 Rev 03, Release 3.2.2 5-145
Configuring Softkeys and Programmable Keys
Use the following procedures to configure the softkeys and programmable keys on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the sections,
“Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters” on page A-200.
Aastra Web UI
1 Click on Operation->Softkeys and XML
or
Click on Operation->Programmable Keys
or
Click on Operation->Expansion Module <N>.
Depending on your phone-model, the key configuration screen displays. The 6757i Key Screen is
shown as an example
.
2 Select a key to configure.
For Softkeys and Expansion Module Keys:
3
In the "Type" field, select the type of softkey you want to configure.
Reference: For available type values on each IP phone model, see Appendix A, the section,
“Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters” on page A-200 .
4 If applicable, enter a label in the “Label” field.