AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 336)

41-001343-01 Rev 03, Release 3.2.2 5-59
Locking IP Phone Keys
The IP phones allow you to lock or unlock programmable keys, softkeys, hard keys, cordless
handset keys, and expansion keys (for expansion modules). When key locking is enabled, the
phone uses any previous local configuration. A user cannot override the configuration of a locked
key.
You can lock and unlock keys using the configuration files only. When viewing the locked key via
the Aastra Web UI, the key is grayed out (disabled) and cannot be changed. Locking is dynamic
for XML pushes.
You use the following “locking” parameters in the configuration files to lock the softkeys and/or
programmable keys on all the phones. The locking parameters impact existing softkey and
programmable key parameters as shown in the table below.
Locking Parameter Impacted Parameters Phone Model Affected
softkeyN locked softkeyN type
softkeyN label
softkeyN value
softkeyN line
softkeyN states
9480i
9480i CT
6735i
6737i
6739i
6755i
6757i
6757i CT
topsoftkeyN locked topsoftkeyN type
topsoftkeyN label
topsoftkeyN value
topsoftkeyN line
6737i
6757i
6757i CT
prgkeyN locked prgkeyN type
prgkeyN value
prgkeyN line
9143i
6730i
6731i
6735i
6753i
6755i
featurekeyN locked featurekeyN type
featurekeyN label
9480i CT
6757i CT
expmodX keyN locked expmodX keyN type
expmodX keyN value
expmodX keyN line
6700i-series phones only
(not applicable to the 6730i, and 6731i)
Note: The 3-Line LCD phones prevent users from setting a speeddial key
via the Phone UI on a key that has been locked.