Audio transmit and receive gain adjustments, Audio transmit and receive gain adjustments -334 – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual

Page 611

Advertising
background image

5-334

41-001343-01 Rev 03, Release 3.2.2

Audio Transmit and Receive Gain Adjustments

The audio gain properties for the IP phone handset, headset, and speakerphone is adjusted to

reduce side-tone and echo on the local and far-end equipment. You can adjust these settings from

-10 db to +10 db to best suit your comfort level and deployment environment by using the

following parameters in the configuration files:

headset tx gain

headset sidetone gain

handset tx gain

handset sidetone gain

handsfree tx gain

audio mode

The default setting for these parameters is 0 (zero).

The following table describes each parameter.

Note:

Aastra Telecom recommends you leave the default of 0 (zero) as

the settings for these parameters.

Parameter

Description

Headset tx gain

The increased (+db) or decreased (-db) amount of signal transmitted from the headset
microphone to t he far-end party.

Headset sidetone gain

The increased (+db) or decreased (-db) amount of sidetone signal from the headset
microphone to the headset speaker.

Handset tx gain

The increased (+db) or decreased (-db) amount of signal transmitted from the handset
microphone to the far-end party.

Handset sidetone gain

The increased (+db) or decreased (-db) amount of sidetone signal from the handset
microphone to the handset speaker.

(continued)

Advertising