AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 267)

4-104 41-001343-01 Rev 03, Release 3.2.2
Configuration Server Protocol
You can download new versions of firmware and configuration files from the configuration
server to the IP phone using any of the following types of protocols: TFTP, FTP, HTTP, and
HTTPS. For each Protocol, you can specify the path for which the configuration files are located
on the server. For HTTP and HTTPS, you can also specify the port number to use for
downloading the phone configuration. For FTP, you can configure a Username and Password
that are authenticated by the FTP server.
The TFTP setting is the default download protocol. You can configure the type of protocol that
the IP phones use by setting it in the configuration files, the IP phone UI, or the Aastra Web UI.
Configuring the Configuration Server Protocol
Use the following procedure to configure the configuration server protocol.
Note: For DHCP to automatically populate the IP address or domain
name for the TFTP, FTP, HTTP, or HTTPS server, your DHCP server
must support download protocol according to RFC2131 and RFC1541 for
Option 66. For more information, see this chapter, the section, “DHCP”
on page 4-3 .
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section, “Configuration
Server Settings” on page A-19.
IP Phone UI
Step Action
1 Press on the phone to enter the Options List.
2 Select Administrator Menu.
3 Enter your Administrator password.
Note: The IP Phones accept numeric passwords only.
4 Select Configuration Server.
5 Select Download Protocol.