AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 449
5-172
41-001343-01 Rev 03, Release 3.2.2
Configuring the speeddial/Conf Key Using the Aastra Web UI
Use the following procedure to configure the speeddial/Conf Key using the Aastra Web UI.
Aastra Web UI
1
Click on Operation->Sottkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module Keys.
2
In the “Type” field, select speeddial/Conf from the list of options.
3
In the “Label” field, enter a key label to assign to the speeddial/Conf key (for example, “Sales”).
4
In the “Value” field, enter the number that the phone dials when the speeddial/Conf key is pressed
(for example, “4556”).
5
In the “Line” field, select the line for which you want to use the key functionality.
6
For phones with softkeys:
In the States field, select the state(s) (idle, connected, incoming, outgoing, busy) for which you want
to use on the key.
Note: States are not applicable to programmable keys (9143i, 6730i, 6731i, 6735i, 6753i, 6755i).
7
Click
to save your changes.
Speeddial/Conf
Option