AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 494)

41-001343-01 Rev 03, Release 3.2.2 5-217
Configuring Park/Pickup Static Configuration Using the Aastra Web UI
Park/Pickup Programmable Configuration (using a softkey)
The programmable method of configuration creates park and pickup keys (softkeys,
programmable keys, expansion module keys) that you can configure on the IP phones.
For all 8 and 11-Line LCD phones you can set a key as "Park" or "Pickup" and then:
• specify a customized label to display on the Phone UI
• specify the state of the park and/or pickup keys
For 3-Line LCD display phones, you can set a programmable key as "Park" or "Pickup".
On 8 and 11-Line LCD Phone UIs
• When a call comes in, and you pickup the handset, the custom label that you configured for the
Park softkey displays on the Phone UI.
• After the call is parked, the label that you configured for the Pickup softkey displays on other
phones in the network. You can then press the "Pickup" softkey, followed by the applicable
value to pickup the call on another phone in your network.
Aastra Web UI
For 8 and 11-Line LCD Phones
1
Click on Basic Settings ->Preferences ->General
2 3. Enter a server value in the Park Call field to which incoming live calls will be parked.
Note: For values to enter in this field, see the table
“Park/Pickup Call Server Configuration Values”
on page 5-216 .
4 Click Save Settings to save your changes.