Last call return (lcr) (sylantro servers), How it works, Configuring last call return – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 501: Last call return (lcr) (sylantro servers) -224, Last call, Return (lcr) (sylantro servers)
5-224
41-001343-01 Rev 03, Release 3.2.2
Last Call Return (lcr) (Sylantro Servers)
Last call return (lcr) allows an administrator or user to
configure a "last call return" function
on a softkey or programmable key. This feature is for Sylantro servers only.
You can configure the “lcr” softkey feature via the configuration files or the Aastra Web UI.
How it works
If
you configure "lcr" on a softkey or programmable key, and a call comes into your
phone, after you are finished with the call and hangup, you can press the key configured
for “lcr” and the phone dials the last call you received. When you configure an “lcr” softkey, the
label “LCR” displays next to that softkey on the IP phone. When the Sylantro server detects an
“lcr” request, it translates this request and routes the call to the last caller.
Configuring Last Call Return
Use the following procedures to configure LCR on the IP phones.
Note:
On the 6739i, you can configure a Last Call Return softkey using
the IP Phone UI also. For more information, see the Aastra Model 6739i
IP Phone User Guide.
Configuration Files
For specific last call return (lcr) parameters you can set in the configuration files, see Appendix A, the
section,
“Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters”