AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 308)

41-001343-01 Rev 03, Release 3.2.2 5-31
Setting Time Server Using the Aastra Web UI
Use the following procedure to set the Time Server and optionally set the IP Address of Time
Servers 1, 2, and/or 3.
6 Press the to return to the previous screen.
7 Press the button or the button at any time to return to the idle screen.
Aastra Web UI
1 Click on Basic Settings->Preferences->Time and Date Setting.
To enable/disable Time Server:
2
The “NTP Time Server” field is enabled by default. If you need to disable the Time Server, uncheck
the box. The Time Server 1, 2, and 3 fields are grayed out when disabled.
To set Time Server 1, 2, and/or 3:
3
Note: The “Time Server” field must be enabled to enter values in the “Time Server 1, 2, and 3”
fields.
In the “Time Server 1”, “Time Server 2”, and/or “Time Server 3” field(s), enter the IP address of the
Time Server 1, 2, and/or 3 in your network, in dotted decimal format. Default for this field is 0.0.0.0.
For example, 132.234.5.4
4 Click to save your changes.
IP Phone UI
Step Action