AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 273)

4-110 41-001343-01 Rev 03, Release 3.2.2
8 Use the following table to configure the applicable server.
IP Phone UI
Step Action
TFTP Settings
- Press TFTP Server.
- Enter the IP address or fully qualified domain name of the primary TFTP server.
- Press TFTP Path.
- Enter the path name for which the configuration files reside on the TFTP server for down-
loading to the IP Phone. If the IP phone’s files are located in a sub-directory beneath the
server’s root directory, the relative path to that sub-directory should be entered in this field.
Enter the path name in the form folderX\folderX\folderX. For example, ipphone\6757i\con-
figfiles.
Optional: You can also configure an Alternate TFTP server and Alternate TFTP Path if
required by selecting the “Alternate TFTP” and the “Alt TFTP Path” parameters.
- Press Use Alternate TFTP, and press “Yes” to use an alternate TFTP server.
Default is “No”.
- Press Alternate TFTP Server.
- Enter the IP address or fully qualified domain name of the alternate TFTP server.
- Press Alt. TFTP Path.
- Enter the path name for which the configuration files reside on the Alternate TFTP server for
downloading to the IP Phone. If the IP phone’s files are located in a sub-directory beneath
the server’s root directory, the relative path to that sub-directory should be entered in this
field. Enter the path name in the form folderX\folderX\folderX. For example,
ipphone\6757i\configfiles.
FTP Settings
- Press FTP Server.
- Enter the IP address or fully qualified domain name of the FTP server.
- Press FTP Path.
- Enter the path name for which the configuration files reside on the FTP server for download-
ing to the IP Phone. If the IP phone’s files are located in a sub-directory beneath the server’s
root directory, the relative path to that sub-directory should be entered in this field. Enter the
path name in the form folderX\folderX\folderX. For example, ipphone\6757i\configfiles.
Optional: You can enter a username and password for accessing the FTP server if required:
- Press FTP Username.
- Enter a username for accessing the FTP server.
- Press FTP Password.
- Enter a password for accessing the FTP server.