AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 872)

41-001343-01 Rev 03, Release 3.2.2 A-141
XML Settings
Parameter –
xml get timeout Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows you to specify a timeout value, in seconds, that the phone waits
for the far side to return a response after accepting the HTTP GET
connection. If the far side accepts the GET connection but never returns
a response, it blocks the phone until it is rebooted. If you enter a value
greater than 0 for this parameter, the phone times out and will not be
blocked.
Format Integer
Default Value 0 (never timeout)
Range 0 to 214748364 seconds
Example xml get timeout: 20
Parameter –
xml application URI
XML Application URI
(in Web UI)
Aastra Web UI Operation->Softkeys and XML->Services
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description This is the XML application you are loading into the IP phone configuration.
Format HTTP server path or fully qualified Domain Name
Default Value Not Applicable
Range Not Applicable
Example xml application URI: http://172.16.96.63/aastra/internet.php
Parameter –
xml application title
XML Application Title
(in Web UI)
Aastra Web UI Operation->Softkeys and XML->Services
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description This parameter allows you to rename the XML application in the IP phone
UI (Services->4. Custom Feature). By default, when you load an XML
application to the IP phone, the XML application title is called "Custom
Feature". The "xml application title" parameter allows you to change that
title.
For example, if you are loading a traffic report XML application, you could
change this parameter title to "Traffic Reports", and that title will display in
the IP phone UI as Services->4. Traffic Reports.
Format Alphanumeric characters
Default Value Not Applicable
Range Not Applicable
Example xml application title: Traffic Reports