AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 927
A-196
41-001343-01 Rev 03, Release 3.2.2
Parameter –
call transfer disabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Enables or disables the Xfer key on the IP phone. If this parameter is set
to 0, the key is active and can be pressed by the user. If this parameter is
set to 1, pressing the Xfer key is ignored.
Format
Boolean
Default Value
0 (false)
Range
0 (false), 1 (true)
Example
call transfer disabled: 1
Parameter –
map redial key to
Map Redial Key To
(in Web UI)
Aastra Web UI
Basic Settings->Preferences->Key Mapping
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Sets the Redial key as a speeddial key if a value is entered for this
parameter. If you leave this parameter blank, the Redial key returns to its
original functionality.
Note: If you configure the Redial key for speeddialing on the 6757i CT
Base Station, the Redial key on the 6757i CT handset retains its original
functionality. The Redial key on the handset is not configured for
speeddial.
Format
Integer
Default Value
Not Applicable
Range
Not Applicable
Example
map redial key to: 5551234