AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 767)

A-36 41-001343-01 Rev 03, Release 3.2.2
SIP Keep Alive Support
Parameter –
sip turn user Aastra Web UI: Advanced Settings->Network->
Advanced Network Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Username that a user must enter when accessing an account on the
TURN server.
Note: The NAT IP configuration parameter takes precedence over the
STUN and TURN parameters.
Format Alphanumeric characters
Default Value Not Applicable
Range Up to 63 alphanumeric characters
Example sip turn user: 0412919146
Parameter –
sip turn pasx Aastra Web UI: Advanced Settings->Network->
Advanced Network Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Password that a user must enter when accessing an account on the
TURN server.
Note: The NAT IP configuration parameter takes precedence over the
STUN and TURN parameters.
Format Alphanumeric characters
Default Value Not Applicable
Range Up to 63 alphanumeric characters
Example sip turn pass: 42447208233b8b8b8a234
Parameter –
sip keepalive timer Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description This value is how many seconds to wait before sending a SIP UDP
keep alive packet to the configured SIP servers. A zero value disables
this feature.
Note: This is only for UDP transport protocol.
Format Integer
Default Value 0
Range Any positive integer
Example sip keepalive timer: 6