AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 590)

41-001343-01 Rev 03, Release 3.2.2 5-313
Aastra Web UI
1 Click on Advanced Settings->Action URI.
2 Enter an XML URI for a startup event in the “Startup” field. For example:
http://10.50.10.140/startup
This parameter specifies the URI for which the phone executes a GET on when a startup event
occurs.
3 Enter an XML URI for a successful registration in the “Successful Registration” field. For example:
http://10.50.10.14/registered.php?auth name=$$SIPAUTHNAME$$
This parameter specifies the URI for which the phone executes a GET on when a successful
registration event occurs.
Note: For a successful registration event, use the associated variables indicated in the table “Action
URIs and Associated Variables” on page 5-309 .
The “Successful Registration” parameter executes on the first successful registration of each
unique line configured on the phone.
4 Enter an XML URI in the “Registration Event” field, for when the phone performs registration. For
example:
http://10.30.100.39/PHPtests/
actionuri.php?action=RegEvt&regstate=$$REGISTRATIONSTATE$$&regcode=$$REGI
STRATIONCODE$$
This parameter specifies the URI that the phone executes a GET on, when a registration event
change occurs.
Note: For a registration event, use the associated variables indicated in the table “Action URIs and
Associated Variables” on page 5-309 .