AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 289)

5-12 41-001343-01 Rev 03, Release 3.2.2
Configuring a Lock/Unlock Key Using the Configuration Files
Using the configuration files, you can configure a key on the phone (softkey, programmable key,
or expansion module key) to use as a lock/unlock key. In the configuration files, you assign the
function of the key as “phonelock”.
Use the following procedure to configure a key as a lock/unlock key using the
configuration files.
Reference
To use the lock/unlock softkey or programmable key, see “Using the Configured Lock/Unlock
Softkey on the IP Phone” on page 5-13 .
Configuration Files
To configure a softkey/programmable key as a lock/unlock key using the configuration files, see Appendix A,
the section,
“Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters” on page A-200.