AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 808)

41-001343-01 Rev 03, Release 3.2.2 A-77
Parameter –
call waiting tone
Play Call Waiting Tone
(in Web UI)
Aastra Web UI: Basic Settings->Preferences->General
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Enable or disables the playing of a call waiting tone when a caller is on an
active call and a new call comes into the phone.
Note: The Call Waiting Tone feature works only if the Call Waiting
parameter is enabled.
Format Boolean
Default Value 1 (enabled)
Range 0 (disable)
1 (enabled)
Example call waiting tone: 0
Parameter –
call waiting tone period
Call Waiting Tone Period
(in Web UI)
Aastra Web UI: Basic Settings->Preferences
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the time period, in seconds, that the call waiting tone is audible
on an active call when another call comes in. When enabled, the call
waiting tone plays at regular intervals for the amount of time set for this
parameter. For example, if set to “30” the call waiting tone plays every 30
seconds. When set to “0”, the call waiting tone is audible only once on the
active call.
Format Integer
Default Value 0
Range 0-4294967295
Example call waiting tone period: 30