AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 165)

4-2 41-001343-01 Rev 03, Release 3.2.2
Overview
An administrator can configure the IP Phone Network and SIP options from the phone UI, from
the Aastra Web UI, or the configuration files. Administrator level options are password
protected in both the IP phone UI and the Aastra Web UI.
The procedures in this section include configuring from the IP phone UI and the Aastra Web UI.
To configure the IP phones using the configuration files, see Appendix A, “Configuration
Parameters.”
To configure the phone using the IP phone UI, you must enter an administrator password. To
configure the phone using the Aastra Web UI, you must enter an administrator username and
password.
References
For configuring the IP phone at the Asterisk IP PBX, see Appendix B, “Configuring the IP
Phone at the Asterisk IP PBX.”
For sample configuration files, see Appendix C, “Sample Configuration Files.” These sample
files include basic parameters required to register the IP phone at the PBX.
Note: An administrator has the option of enabling and disabling the use
of password protection in the IP phone UI. This is configurable using the
configuration files only. For more information about this feature, see
Appendix A, the section “Password Settings” on page A-15.
Note: In the IP phone UI, the default password is "22222". In the
Aastra Web UI, the default admin username is "Admin" and the default
password is "22222".