AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 860)

41-001343-01 Rev 03, Release 3.2.2 A-129
Autodial Settings
Global Settings
Parameter –
sip autodial number
Autodial Number
(in Web UI)
Aastra Web UI Advanced Settings->Global SIP->
Autodial Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Globally specifies the SIP phone number that the IP phone autodials
when the handset is lifted from the phone cradle. An empty (blank)
value disables autodial on the phone.
Format Integer
Default Value Blank
Range Any valid SIP number
Examples sip autodial number: 8500
Parameter –
sip autodial timeout
Autodial Timeout
(in Web UI)
Aastra Web UI Advanced Settings->Global SIP->
Autodial Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Globally specifies the time, in seconds, that the phone waits to dial a
preconfigured number after the handset is lifted from the IP phone
cradle.
If this parameter is set to 0 (hotline), the phone immediately dials a
preconfigured number when you lift the handset. If this parameter is set
to a value greater than 0, the phone waits the specified number of
seconds before dialing the preconfigured number (warmline) when you
lift the handset.
Default is 0 (hotline).
Format Integer
Default Value 0
Range 0-120
Examples sip autodial timeout: 30