AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 926)

41-001343-01 Rev 03, Release 3.2.2 A-195
Mapping Key Settings
This section provides the hard key settings you can use to enable and disable the Redial, Conf, and
Xfer keys on the IP phone.
Parameter –
redial disabled Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the Redial key on the IP phone. If this parameter is set
to 0, the key is active and can be pressed by the user. If this parameter is
set to 1, pressing the Redial key is ignored, and the dialed number is not
saved to the "Redial List".
Format Boolean
Default Value 0 (false)
Range 0 (false), 1 (true)
Example redial disabled: 1
Parameter –
conference disabled Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the Conf key on the IP phone. If this parameter is set
to 0, the key is active and can be pressed by the user. If this parameter is
set to 1, pressing the Conf key is ignored.
Format Boolean
Default Value 0 (false)
Range 0 (false), 1 (true)
Example conference disabled: 1