AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 844)

41-001343-01 Rev 03, Release 3.2.2 A-113
Parameter –
sips local certificate
Local Certificate Filename
(in Web UI)
Aastra Web UI Advanced Settings->TLS Support
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows you to specify the Local Certificate file to use when the phone uses
the TLS transport protocol to setup a call.
This parameter is required when configuring TLS (optional for Persistent
TLS.)
You can use this parameter in three ways:
•
To download no certificates
• To download a certificate from the original configuration server
• To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A FILENAME at
the end of the string. For example:
sips local certificate:ftp://admin:[email protected]:50/path/
phonesLocalCert.pem
where “path” is the directory and “phonesLocalCert.pem” is the filename. If
you do not specify a filename, the download fails.
See examples for each below.
Note: The certificate file must use the format “.pem”. To create specific
certificate files to use on your IP phone, contact Aastra Technical Support.
Format <file name>.pem
Default Value Not Applicable
Range Not Applicable
Example The following example downloads no local certificate file:
sips local certificate:
The following example downloads the local certificate file from the original
configuration server.
sips local certificate: phonesLocalCert.pem
The following example uses FTP to download the firmware file
“phonesLocalCert.pem” (local certificate file) from the “path” directory on
server 1.2.3.4 using port 50:
sips local certificate:ftp://admin:[email protected]:50/path/
phonesLocalCert.pem