AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 660)

41-001343-01 Rev 03, Release 3.2.2 6-33
4 Select 802.1x Settings.
5 Select 802.1x Mode.
6 Select EAP-MD5 to configure the phone to use MD5 authentication;
or
Select EAP-TLS to configure the phone to use TLS authentication.
Note: The 802.1x Protocol is disabled by default. If you select EAP-TLS authentication, you must use
the configuration files or the Aastra Web UI to configure the certificates and private key for the phone.
7 Press Done (on 8 and 11-Line LCD phones)
or
Press Set (on 3-Line LCD phones).
8 To configure MD5, select EAP-MD5 Settings.
Aastra IP Phone UI
Step Action
Done -
802.1x Settings
1. 802.1x Mode
2. EAP-MD5 Settings
- Select
2. EAP-MD5 Settings
Yes
Next Enter
1. 802.1x Mode
Next Enter
Done -
802.1x Mode
Disabled
Cancel -
EAP-MD5
EAP-TLS
1. 802.1x Mode
Next Enter
802.1x Mode
Disabled
Next Set
4. 802.1x Settings
Next Enter
802.1x Mode
EAP-MD5
Next Set
802.1x Mode
EAP-TLS
Next Set