Action uris – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 585
5-308
41-001343-01 Rev 03, Release 3.2.2
Action URIs
The IP phones have a feature that allows an administrator to specify a uniform resource
identifier (URI) that triggers a GET when certain events occur. The IP phone events that support
this feature are:
The IP phones have a feature that allows an administrator to specify a uniform resource
identifier (URI) that triggers a GET when certain XML events occur. The Action URI feature
prevents the phones from hanging if the Action URIs should fail. The phones also support
transparent, non-blocking, XML post execute item URIs.
The IP phone XML events that support this feature are defined in the following table.
Action URI
Description
Startup
Specifies the URI for which the phone executes a GET on when a startup
event occurs.
Successful Registration
Specifies the URI for which the phone executes a GET on when a successful
registration event occurs.
Registration Event
Specifies the URI for when registration events occur or when there are
registration state changes.
Note: This action URI is not called when the same event is repeated (for
example, a timeout occurs again when registration is already in a timeout
state.)
Incoming Call
Specifies the URI for which the phone executes a GET on when an incoming
call event occurs.
Outgoing Call
Specifies the URI for which the phone executes a GET on when an outgoing
call event occurs.
Offhook
Specifies the URI for which the phone executes a GET on when an offhook
event occurs.
Onhook
Specifies the URI for which the phone executes a GET on when an onhook
event occurs.
Connected
Specifies the URI for which the phone executes an HTTP GET when it goes
into the “connected” state. This includes regular phone calls, intercom calls,
paging calls, RTP streaming, and the playing of a WAV file. It is also
triggered when the phone establishes the second leg of a 3-way call. For
more information, see
“Action URI Connected”
on
page 5-354
.
Disconnected
Specifies the URI that the phone executes a GET on, when it transitions
from the incoming, outgoing, calling, or connected state into the idle state.
For more information, see
XML SIP Notify
Specifies the URI to be called when an empty XML SIP NOTIFY is received
by the phone. For more information, see
on
.
Poll
Specifies the URI to be called every "action uri poll interval" seconds. For
more information, see
.
Poll Interval
Specifies the interval, in seconds, between calls from the phone to the
"action uri poll". For more information, see
on
.