AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual

Page 142

Advertising
background image

41-001343-01 Rev 03, Release 3.2.2

3-55

Registration Timeout Retry
Timer

sip registration timeout retry
timer

Specifies the length of time, in seconds, that the phone
waits until it re-attempts to register after a REGISTER
message times out.

If this parameter is set lower than 30 seconds, the phone
uses a minimum timer of 30 seconds.

For more information, see Chapter 4,

“Advanced SIP

Settings (optional)”

on

page 4-83

.

Registration Renewal
Timer

sip registration renewal timer The threshold value, in seconds, prior to expiration, that the

phone renews registrations. The phone will automatically
send registration renewals half-way through the registration
period, unless half-way is more than the threshold value.

For example, if the threshold value is set to 60 seconds and
if the registration period is 600 seconds, the renewal
REGISTER message will be sent 60 seconds prior to the
expiration, as half-way (600/2) > 60. If the registration
period was 100 seconds, then the renewal would be sent at
the half-way point as (100/2) < 60.

For more information, see Chapter 4,

“Advanced SIP

Settings (optional)”

on

page 4-83

.

BLF Subscription Period

sip blf subscription period

Specifies the time period, in seconds, that the IP phone
resubscribes the BLF subscription service after a software/
firmware upgrade or after a reboot of the IP phone.

For more information, see Chapter 4,

“Advanced SIP

Settings (optional)”

on

page 4-83

.

ACD Subscription Period

sip acd subscription period

Specifies the time period, in seconds, that the IP phone
resubscribes the Automatic Call Distribution (ACD)
subscription service after a software/firmware upgrade or
after a reboot of the IP phone.

For more information, see Chapter 4,

“Advanced SIP

Settings (optional)”

on

page 4-83

.

BLA Subscription Period

sip bla subscription period

Specifies the amount of time, in seconds, that the phone

waits to receive a BLA subscribe message from the server.

If you specify zero (0), the phone uses the value specified

for the BLA expiration in the subscribe message received

from the server. If no value is specified, the phone uses the

default value of 300 seconds.

For more information, see Chapter 4,

“Advanced SIP

Settings (optional)”

on

page 4-83

.

Blacklist Duration

sip blacklist duration

Specifies the length of time, in seconds, that a failed server
remains on the server blacklist. The IP phone avoids
sending a SIP message to a failed server (if another server
is available) for this amount of time.

For more information about Blacklist Duration, see Chapter
6, the section,

“Blacklist Duration”

on

page 6-22.

Parameter in

Aastra Web UI

Parameters in

Configuration Files

Description

Advertising