AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 852)

41-001343-01 Rev 03, Release 3.2.2 A-121
Parameter –
802.1x local certificate
Local Certificate
(in Web UI)
Aastra Web UI: Advanced Settings->802.1x Support->
EAP-TLS Settings
Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the file name that contains the local certificate.
You can use this parameter in three ways:
•
To download no certificates
• To download a certificate from the original configuration server
• To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A FILENAME
at the end of the string. For example:
802.1x local certificate:ftp://admin:[email protected]:50/path/
phones802LocalCert.pem
where “path” is the directory and “phones802LocalCert.pem” is the
filename. If you do not specify a filename, the download fails.
See examples for each below.
Format String
Default Value Not Applicable
Range Not Applicable
Example The following example downloads no local certificate file:
802.1x local certificate:
The following example downloads the local certificate file from the
original configuration server.
802.1x local certificate: phones802LocalCert.pem
The following example uses FTP to download the firmware file
“phones802LocalCert.pem” (802.1x local certificate file) from the “path”
directory on server 1.2.3.4 using port 50:
802.1x local certificate:ftp://admin:[email protected]:50/path/
phones802LocalCert.pem