Options key redirection, Configuring xml redirection of the options key – AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 608
41-001343-01 Rev 03, Release 3.2.2
5-331
Configuring XML Redirection of the Redial, Xfer, Conf, and Icom Keys, and the
Voicemail Option
Use the following procedure to configure XML redirection of the Redial, Xfer, Conf, and Icom
keys, and the Voicemail option.
Options Key Redirection
The IP phones allow the redirecting of the Options Key to an XML script. This allows the server to
provide the phone with available options, rather then accessing them from the phone-side. You
access the Options Key XML script by pressing the Options Key. You can still access the Options
Menu from the phone-side by pressing and holding the Options key to display the phone-side
Options Menu.
The following URI configuration parameter controls the redirection of the Options Key:
•
options script
IMPORTANT NOTES
• If no Options URI script is configured, the local Options Menu on the phone displays as
normal.
• If you configure password access to the Options Menu, this password is required when
accessing the local Option Menu, but is not required for the Options Key redirection feature.
• Pressing the Options Menu for redirection from the server does not interfere with normal
operations of the phone (for example, pressing the options menu when on a call does not affect
the call).
• If the phone is locked, you must unlock the phone before accessing the Options Menu redirect
feature. After pressing the Options Key, the phone displays a screen that allows you to unlock
the phone before continuing.
An Administrator can configure the XML Options Key, redirection URI parameter using the
configuration files only.
Configuring XML Redirection of the Options Key
Use the following procedure to configure XML redirection of the Options key.
Configuration Files
For the specific parameters you can set in the configuration files, see Appendix A, the section,
Redirection Settings (for Redial, Xfer, Conf, Icom, Voicemail)”
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section,