AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 887)

A-156 41-001343-01 Rev 03, Release 3.2.2
Call Hold Reminder Frequency
Parameter –
call hold reminder frequency Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the time interval, in seconds, between each ring splash sound
on the active line. For example, if a call comes into Line 1, and then a call
comes into Line 2 and you answer Line 2, Line 1 is automatically placed
on hold. While on the active Line 2, after 7 seconds, a ring splash audio
sounds on the line reminding you that the call on Line 1 is still on hold
(determined by the “call hold reminder timer” parameter), and then the
ring splash is heard again after 60 seconds (determined by this
parameter).
Notes:
1. You must enable the “call hold reminder” and/or “call hold reminder
during active calls” parameter(s), and the “call hold reminder timer”
parameter, for this parameter to work.
2. A value of “0” prevents additional rings.
Format Integer
Default Value 60
Range 0-4294967295
Example call hold reminder frequency: 50