AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN - Manual (Page 959)

A-228 41-001343-01 Rev 03, Release 3.2.2
Customizing the Key Type List
Softkeys, Programmable Keys, Expansion Module Keys
Parameter –
softkey selection list Configuration Files aastra.cfg, <model>.cfg, <mac>.cfg
Description Allows you to specify which key types to display and the order in which to
display them in the “Type” list for softkeys, programmable keys, and/or
expansion module keys when configuring the keys in the Aastra Web UI.
If no value is specified for this “softkey selection list” parameter, the
key “Type” list displays ALL of the key types by default in the Aastra Web
UI.
Notes:
1. Any key types configured that do not apply to the phone’s
environment are ignored.
2. The SAVE and DELETE keys appear by default as
Keys 1 and 2 on the 6753i and 9143i, and as 5 and 6 on the 6730i and
6731i unless specifically changed by your Administrator.
3. An Administrator must use the English value when configuring the
key types in the configuration files.
4. Any key type already configured on a phone displays in that key’s
“Type” list, in addition to the values specified for this parameter.
5. After configuring specific key types for a phone, the key types in
the Aastra Web UI display the same for both the User and Administrator
Web interfaces for that phone.
Format Alpha Characters in a comma separated list
Default Value
Range Any of the key types in the “Default Value” field above.
Example softkey selection list: blf, speeddial, line, xml
• none • callforward
• line • blf/xfer
• speeddial • speeddial/xfer
• dnd • speeddial/conf
• blf • directory
• list • callers
• acd • conf
(6730i, 6731i, 6753i, 9143i)
• dcp • xfer
(6730i, 6731i, 6753i, 9143i)
• xml • icom
• flash • services
• sprecode • phonelock
• park • paging
• pickup • empty
(6735i, 6737i, 6755i, 6757i,
6757 CT, 9480i, 9480i CT)
• lcr