AASTRA 6700i series, 9143, 9480i, 9480i CT SIP Administrator Guide EN User Manual
Page 771
![background image](/manuals/253368/771/background.png)
A-40
41-001343-01 Rev 03, Release 3.2.2
Parameter–
https user certificates
Trusted Certificates
Filename
(in Web UI)
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Aastra Web UI
Advanced Settings->Network->HTTPS Settings
Description
Specifies a file name for a .PEM file located on the configuration server. This
file contains the User-provided certificates in PEM format. These certificates
are used to validate peer certificates.
Note: You must disable the “https validate certificates” parameter in order
for the phone to accept the User-provided certificates.
You can use this parameter in three ways:
•
To download no certificates
•
To download a certificate from the original configuration server
•
To download a certificate from another specified server
To download a specific file, the string value MUST HAVE A FILENAME at the
end of the string. For example:
https user certificates: ftp://admin:[email protected]:50/path/
phonesHTTPSUserCert.pem
where “path” is the directory and “phonesHTTPSUserCert.pem” is the
filename. If you do not specify a filename, the download fails.
See examples for each below.
Format
Alphanumeric string in the format <filename.pem>
Default Value
Not Applicable
Range
Not Applicable
Example
The following example downloads no HTTPS user certificate file:
https user certificates:
The following example downloads the HTTPS user certificate file from the
original configuration server.
https user certificates: phonesHTTPSUserCert.pem
The following example uses FTP to download the firmware file
“phonesHTTPSUserCert.pem” (HTTPS user certificate file) from the “path”
directory on server 1.2.3.4 using port 50:
https user certificates:ftp://admin:[email protected]:50/path/
phonesHTTPSUserCert.pem